YIHUA F-type soldering iron holder with a sponge tray for tip cleaning.
Topkko Tools — soldering stations, SMD rework stations, DC power supplies, screw counting machines, microscopes and ESD magnifiers
Shop by category
Every Category We Stock
From a first soldering station to a four-axis soldering robot — organised the way a workshop actually thinks about equipment.
Antistatic
5 productsAuto Feeder Soldering Station
11 productsBGA Rework Station
4 productsDC Power Supply
16 productsDesoldering Station+Gun
5 productsFume Extractor
10 productsIon Blower
5 productsMagnifier
39 productsMicroscopes
30 productsProfessional Rework Station
9 productsSemi Auto Soldering Machine
1 productSMD Rework Station
29 productsSoldering Accessories
84 productsSoldering Station
53 productsSoldering Tips
10 productsPreheating Station
4 productsSolder Pot
4 productsUltrasonic Cleaner
3 productsTools & Testers
8 productsSpot Welder
1 productScrew Feeding & Fastening
10 productsHandpicked
Featured Products
The instruments our technical team recommends most often, across every price point.
YIHUA X-6 soldering iron holder with a spring-type iron holder.
The 938BD with a classic 936-type iron handle and a built-in magnifier.
Hot-air rework paired with a fast 75 W T12 soldering iron and a built-in magnifier for close work.
A 750 W 2-in-1 station with temperature calibration, a fixed 10-minute sleep and hot-air fail-safe protection.
An 810 W hot-air and soldering station with three memory channels, hot-air fail-safe and automatic shutdown.
A 2-in-1 station with ±50 °C temperature compensation, three memory channels, and a high-temperature alarm and protection.
About us
Equipment We Can Actually Service
Topkko Tools supplies soldering, rework, inspection and power supply equipment to electronics manufacturers, repair centres and training institutes across India. We have been doing it since 2011.
We only stock equipment we can support after the sale. That single rule decides what goes into the catalogue — if we cannot get spares, tips or heating elements for it in two years' time, we do not sell it today.
Just landed
New Arrivals
The latest additions to the catalogue — newly stocked models and recent releases.
A spring balancer that holds an electric or pneumatic screwdriver over the workstation, for loads of 0.3–2 kg. Cleanroom-grade design for electronics (3C) assembly; height and tension adjustable.
A handheld automatic screw locking machine for M2.0–M5.0 screws up to 18 mm. After each screw is driven, the next one arrives at the bit automatically — place the bit on the hole, press lightly, and the screw is locked.
An 850 mL refill hopper that tops up a screw feeder automatically when its low-level sensor calls for screws, so the feeder needs refilling far less often. For M1.0–M5.0 screws. CE and RoHS.
An air-blow screw feeding machine that sends screws from a 1100 mL roller hopper straight to the screwdriver bit, for M1.0–M6.0 screws up to 35 mm. PLC control with fault alarms. CE and RoHS.
A rotary-disc screw feeder for M1.0–M5.0 screws up to 12 mm, at 60–180 pcs per minute, with jam reverse, fault alarm and a signal output for automatic machines.
A compact automatic screw feeder for M1.0–M5.0 screws up to 10 mm, presenting screws at 60–180 pcs per minute, with an adjustable track, a 0–9999 counter and a jam alarm.
A screw and small-parts counter for M2.0–M5.0 screws up to 20 mm, at 60–180 pcs per minute. Used for fixed-count packing and to make sure no screw is missed during assembly.
A compact benchtop screw counter for M2.0–M4.0 screws up to 10 mm long. Set any count from 0 to 9999; once the set quantity is picked up, it starts the next cycle automatically.
A 60 W brushless electric screwdriver with stepless torque from 2.0 to 18.0 kgf·cm (±4%) and 700–1000 rpm, for continuous driving on medium-sized workpieces.
A 30 W brushless electric screwdriver with stepless torque from 1.0 to 10.0 kgf·cm (±4%) and 1000–1600 rpm, for precision electronics assembly and dust-free workshops.
Brands we carry
Four Brands, One Support Desk
Whichever brand you buy, the warranty, spares and technical help come from us.
Most ordered
Best Sellers
What repair benches and production lines reorder most.
Replacement iron handle for the YIHUA 939D-II and 939D-VII stations.
An upgrade of the 948DQ-I: smaller, quieter and with ultra-low suction noise.
Automatic solder-feed soldering station with stepper-motor wire feed, PID temperature control and a 200–480 °C range, for repetitive production and repair work.
The 938BD with a classic 936-type iron handle and a built-in magnifier.
Hot-air rework paired with a fast 75 W T12 soldering iron and a built-in magnifier for close work.
An 810 W hot-air and soldering station with three memory channels, hot-air fail-safe and automatic shutdown.
A 2-in-1 station with ±50 °C temperature compensation, three memory channels, and a high-temperature alarm and protection.
Why Topkko
Bought Once, Supported For Years
We sell equipment we can service. That single constraint decides what goes into the catalogue.
Pan-India Delivery
Delivered anywhere in India, tracked from the moment it leaves us.
Secure Payments
UPI, cards, net banking and GST invoicing on every order.
Quality Products
Equipment chosen because we can support and service it.
Easy Returns
Straightforward replacement on eligible items.
Customer Support
Engineers on the phone, not a script — Mon to Sat, 9am to 7pm.
Customer reviews
What Our Customers Say
Feedback from repair centres, contract manufacturers and training institutes.
We run six benches on the TK-936A. Two years in, not one heating element has failed, and the tips are available everywhere. The reorder decision took about four seconds.
The dual channel supply replaced two separate units and a nest of jumper leads. Series mode alone paid for the upgrade. Shipping took three days to Bengaluru.
We fitted the whole ESD bench out here — magnifier lamps, rework station, microscope. Support actually answered the grounding question properly instead of forwarding a datasheet.